Woodland Children's Rug
8:00 AM
I'm excited to share a tutorial to make your own woodland children's rug!
Rugs can be so expensive, but add such an impact on a room.
I've been looking for a smaller, woodland rug for my daughter's nursery, but couldn't find one and decided to DIY! I chose to use felt, and waited for the premium felt went on sale. It's a little bit more expensive than regular craft felt, but it doesn't stretch or pith as easily. If I had an unlimited craft budget I'd have loved to create an actual wool rug using 100% wool felt, but I stuck with the mid-grade for this project.
It has a woodland scene that includes a fox, hedgehog, bunny, deer, and owl all nestled in a grove of birch trees. My favorite element is the tree carving where I sewed the initials of myself and my husband, (the rug being for my daughter) representing mom and dad.
________________________________________________________________
Here's the tutorial to make a smaller, simple fox rug.
You can use these steps for any size or shaped rug you'd like to make.
SUPPLIES:
-felt scraps (backing 18" x 24")
-invisible thread (found in quilting notions)
-1" double fold bias tape
-rug backing (foam headliner or rubber grip)
-disappearing ink fabric pen
I sketched some basic animal shapes: fox, hedgehog, bunny, owl and fawn
1. Cut Out Felt
Depending on your scene, you'll need to configure the layers of the background.
Base: large piece of felt to secure all the other layers (18"x24")
SKY: light blue 9" x 24"
Background GRASS: dark green 6" x 24"
Foreground GRASS: kelly green (strip 6"x 24" ) and cut with 1-2" grass spikes
FOX: red, white, gray cut pieces with provided pattern
TREE: ivory and brown, (5" wide x 18" tall)
2. Finish Animals
After cutting out your animals, each has details that need to be sewn on. Top-stitch with invisible thread around the added felt features of the animals to attach to the base. You can use a narrow zig-zag or a straight stitch 1/8" from raw edge.
Next you can add the details by hand embroidery, or using your sewing machine. I chose to use a free motion presser foot to add the eyes, beak of owl, inner ears of the deer and bunny, etc. Sketching features on first with disappearing ink to helps guide as you sew.
This fox has little lashes to look more feminine.
3. Finish Trees
Taking your tree strips, you'll first cut the birch rings. Fold tree in half and snip out a sliver. Vary the width and location of your birch rings throughout trunks of larger trees.
After layering your brown strip behind your ivory, you'll need to top stitch the birch rings.
Here is also where you'd top-stitch the owl in the hole.
You can also add the carved tree initials. I used the free motion presser foot with the feed dogs down and brown thread.
*You'll notice on the large rug, the trees got narrower in the distance and were 2", 1" and some only 1/2" wide to give the depth of distance to the scene. Only the larger trees had the slit details.
4. Assemble Layers
To sew it all together, you'll work from the top/back to the bottom/front.
I used a regular presser foot, invisible thread and a straight stitch 1/8" from edge to attach all layers to the felt base.
As you sew the layers on, be sure to keep each layer smooth and even.
-background: Sew the sky and background grass to the felt base layer.
-middleground: top-stitch fox and medium sized trees
-foreground: sew on the foreground grass
-front: the largest tree goes on top of everything
5. Back and Finish Rug
Once the layers are sewn to the base, you'll probably need to clean up the edges. I also round my corners using a plate.
To give the rug more weight and prevent it from sliding, I added foam headliner (feels like light neoprene) to the large rug and rubber grip backing for the small.
Both rug backings I found a Joann's in the home decor section on the large rolls.
Cut your backing of choice to fit your rug and zig zag or serge around the edges to sew backing to rug.
To finish around the edge, I added contrasting 1" double fold bias tape. You can buy packaged solid colors, but I wanted a patterned fabric and made my own using a Clover 2" bias tape maker you can find in the quilting notion section of most craft stores.
You can hand sew the binding on the rug as you would bind a quilt, but I use my machine.
Fold bias tape around edge and top stitch through all layers. To finish the ends, I fold the raw edge under then overlap about 1/2" from the original finished edge.
You're finished!
A cute, affordable rug that is easy to customize for your space!
Thanks!
11 comments
Thank you very much for this tutorial! This rug is amazing! I want to try to make it for my baby boy...hoping to be able to do it! :o)
ReplyDeleteHave a nice day!
Beautiful! You did a great job!
ReplyDeleteso cute Jessica - love it!
ReplyDeleteWow! that is so cute and looks so nice in their room. You did a great job and thanks for the tutorial!
ReplyDeleteSuch a cute and clever idea!!!! I adore this rug!
ReplyDelete-Ashley
http://distractedashley.blogspot.com
oh my word! This rug is utterly fantastic! Thank you for the tutorial and patterns! Way too awesome...pinning this for sure!
ReplyDeleteThe rug is gorgeous it has a real sense of depth to it. Love your work
ReplyDeleteThis is absolutely amazing! Thank you for sharing the tutorial. I can't get over how beautiful the rug is.
ReplyDeletewow, what a creative and beautiful rug. thanks for the tutorial!
ReplyDeleteOh my gosh this is the cutest!!
ReplyDeleteI plan on making this rug soon, what size was the larger rug? I want to get the right supplies.
ReplyDeleteSandy
Thank you for stopping by, we love to hear from you!