Tutorial: Three-eyed Monster Hat

4:30 AM

Second tutorial for the three-eyed monster hat originally posted on Tatertots and Jello last month.

Monster hats are fun for kids, oar if you don't have kids on your gift list this year, you could use the pattern to sew some plain hats for teenagers--these ones are for my nieces in their high school colors!
To make these plain hats, follow directions below but skip all the monster face additions.  
These are also reversible!

But on to the monsters!
I really wanted to share both monster variations but didn't want to bog down Jen's series with a massive post, so this tutorial is just for the three-eyed monster hat.
You can find the tutorial for the striped monster hat upcycled from a men's light sweater on HERE with the round horns, yarn hair, and pointed teeth:

Monster Snow Hats:
Three Eyed Version

**Please be respectful of my designs and only use for personal use.  Not intended for commercial sale or manufacture, even on a home based scale.
Make them for yourself or as gifts, but I'd appreciate not using my pattern and instructions for profit.  Thanks. Questions email me: runningscissor@gmail.com
So here we go!

3 pages, select no scaling or print at 100%
Pattern includes three sizes: toddler, kid, and teen/ adult

1/2 yard outer fabric (fleece, faux fur, minky, upcycled sweater)
1/2 yard lining (knit, flannel, any of the above)
scraps for monster elements
scraps of fusible interfacing 
buttons for eyes
handful of polyfil batting

all seam allowances are 1/2" unless otherwise noted

Cut out hat piece from lining and outer fabric, taking note of the fold on the pattern pieces.
For the three eyed monster you'll need six eye shapes from your the fabric.
Trace the mouth pieces and eye circles on fusible interfacing.

Select the scraps for monster elements and iron interfacing according to manufacture instructions to wrong side of fabric.
Cut out shapes


1. Sew the eye circles on right side of three eye fabric shapes.  I use a narrow zig-zag stitch with barely any stitch length (applique stitch) to make the thick applique border.  If fabric has stretch, use a coffee filter to stabilize.
2. Sew on button eyes using black thread to create the pupils.
3. Take remaining three eye fabric pieces and place (right sides together) with a button sewn eye.
4.  Sew around edge with 1/4" seam allowance, leaving bottom open.
5. Turn right side out and stuff each eye with batting. *I stuff them pretty firmly to help them stand up on finished hat

Finish Monster Face

Sew center front seam with outer fabric.  Using 1/2" seam allowance, sew from pointed top of hat to fold.
Rather than just sewing off fabric to create a point, taper seam into fold to create the curve of the front of the hat.

Pin teeth to mouth piece.  Using same applique zig-zag stitch, outline each tooth, sewing it to mouth piece.  Once teeth are sewn on, trim away solid bars along mouth piece edge.
Open outer fabric hat and pin finished mouth to center of hat vertically.
Sew around mouth with applique stitch.

Attach Eyes and Finish Outer Hat

Sew center back seam opposite fold (with right sides together).

Pin finished eyes to hat front, making sure the front of the eye is right sides to the mouth.
Pin one eye on center seam, then the other two 1" to each side.
Baste eyes to hat, making sure you sew through stuffed batting to help eyes stand up when finished.
Line up hat right sides together (front to back) and sew curved seam that goes ear to ear.  Sew seam, remembering to taper into folds on each end again.

Eyes should be facing forward when turned right side out.


Cut lengths of yarn.
For the braided strap, cut 12 pieces 36" long each.  Separate them into two sections of 6 strands.
For the pom-pom, cut 50 to 75 short strands 6-7" long.  Cut the stack in half to make to two piles of 3 to 3.5" long strips.

1. Lay out one section of 6 (36" long) strand of yarn.  Find center and lay one pile of short yarn across.
2. Tie long yarn ends around center of short pile.
3. Pull as tight as you can, making the short pile squish into a pom pom.
4.  Tie another loop on top of first to create a square knot, pulling it as tight as you can again.
5. Separate long strands into three sections, with 4 pieces in each section.
6. Braid long strands tightly to the end.

Sew Lining and Complete Hat
Sew lining into hat, first sewing the front and back seams, then lining seams in the center and sewing the curved seam from ear to ear.  Remember to taper all seams into fold for rounded smooth shape of finished hat.

Determine how long you prefer the straps and sew braids to right side of lining at center of ear flap.  Pom poms should be up toward head.  Sew forward and back in seam allowance to secure straps.
Place outer hat (inside out) over lining (right side out) with pom poms up in hat and align bottom edges.
Sew around bottom edge of hat, making sure to leave a section unsewn that will make a 4-5" hole for turning.  Position hole at back of hat.

Pull both outer hat and lining through hole, turning hat right side out.  Push lining back up into hat and smooth out edges, especially around ear flaps.
Fold raw edges under and pin hole closed.
Top-stitch around bottom seam of hat 1/4" from edge, sewing hole closed and finishing bottom seam.

You're Finished!!

You Might Also Like


  1. The monster faces definitely make winter hats much more fun! I love this idea!
    Seamingly Smitten

  2. Super chłopaki, fantastycznie wyglądają w tych czapkach.

  3. J adore ... Merci pour les explications et le patron. And happy new year ;-)

  4. Cute! I so want to use the pattern to make some plain ones for Nat. Pinning!


Thank you for stopping by, we love to hear from you!

Popular Posts